PRITOBOND
Pritobond
It is used to remove mild oil, rust and form a thin layer of iron phosphate coating on the metal substrate. It can be applied on any ferrous metals and also on aluminium, zinc die casting, galvanized surfaces and metal process chemical.
-
Shake well before use.Depending upon scale, rust and oil on job apply directly or dilute with water in the ratio of 1:1 or 1:2 by using brush, cloth or dip process.After few seconds, wipe it with dry clean cloth. Within few hours, apply primer, paint or any organic coating..
-
Wear goggles and apron are recommended during process.If intake seek medical advise immediately. Wash the hands perfectly after using PRITOBOND. Keep out of reach of children..
.png)
For Enquiry
